For example, the timer setting is 30 seconds. If you change it to 10 seconds 2 seconds after the port
is shut down, the port will come up 8 seconds later. If you change the timer setting to 2 seconds 10
seconds after the port is shut down, the port comes up immediately.
Examples
# Set the port status detection timer to 100 seconds.
<Sysname> system-view
[Sysname] shutdown-interval 100
sysname
Use sysname to set the device name.
Use undo sysname to restore the default.
Syntax
sysname sysname
undo sysname
Default
The default device name is HPE.
Views
System view
Predefined user roles
network-admin
Parameters
sysname: Specifies a name for the device, a string of 1 to 64 characters.
Usage guidelines
A device name identifies a device in a network and is used in CLI view prompts. For example, if the
device name is Sysname, the user view prompt is <Sysname>.
Examples
# Set the name of the device to R2000.
<Sysname> system-view
[Sysname] sysname R2000
[R2000]
time at
Use time at to specify an execution date and time for a non-periodic schedule.
Use undo time to delete the execution date and time configuration for a non-periodic schedule.
Syntax
time at time date
undo time
Default
No execution time or date is specified for a non-periodic schedule.
346