Password-Recovery Enable - HPE D6020 Maintenance And Service Manual

Parameters
cpu-threshold: Specifies the CPU usage threshold in percentage. The value range is 0 to 100.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command sets
the CPU usage threshold for the active MPU. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command sets the CPU usage threshold for the master device. (Centralized devices in
IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command sets the
CPU usage threshold for the global active MPU. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)
Usage guidelines
The device samples CPU usage at an interval of 1 minute. If the sample is greater than the CPU
usage threshold, the device sends a trap.
Examples
# Set the CPU usage threshold to 80%.
<Sysname> system-view
[Sysname] monitor cpu-usage threshold 80
Related commands
display cpu-usage configuration

password-recovery enable

Use password-recovery enable to enable password recovery capability.
Use undo password-recovery enable to disable password recovery capability.
Syntax
password-recovery enable
undo password-recovery enable
Default
Password recovery capability is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Password recovery capability controls console user access to the device configuration and SDRAM
from Boot ROM menus.
If password recovery capability is enabled, a console user can access the device configuration
without authentication to configure new passwords.
If password recovery capability is disabled, console users must restore the factory-default
configuration before they can configure new passwords. Restoring the factory-default configuration
deletes the next-startup configuration files.
331