Usage guidelines
CAUTION:
•
(Centralized devices in standalone or IRF mode.) This command permanently deletes the next-startup
configuration file from the device in standalone mode or from all member devices on an IRF fabric. Before
performing this task, back up the file as needed.
•
(Distributed devices in standalone or IRF mode.) This command permanently deletes the next-startup
configuration file from each MPU. Before performing this task, back up the file as needed.
You can delete the main file, the backup file, or both.
To delete a file that is set as both main and backup next-startup configuration files, you must execute
both the reset saved-configuration backup command and the reset saved-configuration main
command. Using only one of the commands removes the specified file attribute instead of deleting
the file.
For example, if the reset saved-configuration backup command is executed, the backup
next-startup configuration file setting is set to NULL. However, the file is still used as the main file. To
delete the file, you must also execute the reset saved-configuration main command.
If you do not specify a configuration file attribute, the reset saved-configuration command deletes
the main next-startup configuration file.
Examples
# (Centralized devices in standalone mode.) Delete the main next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash: is being cleared.
Please wait ...........
Configuration file is cleared.
# (Distributed devices in standalone mode.) Delete the main next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash: is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
Slot 1:
Erase next configuration file successfully
# (Centralized devices in IRF mode.) Delete the backup next-startup configuration file.
<Sysname> reset saved-configuration backup
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash: is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
Slot 2:
Erase next configuration file successfully
# (Distributed devices in IRF mode.) Delete the backup next-startup configuration file.
<Sysname> reset saved-configuration backup
The saved configuration file will be erased. Are you sure? [Y/N]:y
196