Reset Saved-Configuration - HPE D6020 Maintenance And Service Manual

This command does not display parameters that are using the default settings.
Some parameters can be successfully set even if their dependent features are not enabled. For
these parameters, this command displays their settings after the dependent features are enabled.
This command can be executed in any user line view to display the running configuration of all user
lines.
Examples
# Display the running configuration on the interface GigabitEthernet1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] display this
#
interface GigabitEthernet1/0/1
port link-mode route
#
return
# Display the running configuration on user lines.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] display this
#
line aux 0
user-role network-operator
#
line con 0
user-role network-admin
#
line vty 0 4
authentication-mode none
user-role network-admin
#
return

reset saved-configuration

Use reset saved-configuration to delete a next-startup configuration file.
Syntax
reset saved-configuration [ backup | main ]
Views
User view
Predefined user roles
network-admin
Parameters
backup: Specifies the backup next-startup configuration file.
main: Specifies the main next-startup configuration file.
195