Archive Configuration Max - HPE D6020 Maintenance And Service Manual

•
The serial number for new configuration archives starts at 1.
The undo archive configuration location command removes the configuration archive directory
and file name prefix settings. The command also performs the following operations:
•
Disables the configuration archive feature (both manual and automatic methods).
•
Restores the default settings of the archive configuration interval and archive
configuration max commands.
•
Clears the configuration archive information displayed by using the display archive
configuration command.
Examples
# Set the configuration archive directory as flash:/archive and the archive file name prefix as
my_archive.
<Sysname> mkdir flash:/archive
Creating directory flash:/archive... Done.
<Sysname> system-view
[Sysname] archive configuration location flash:/archive filename-prefix my_archive
Related commands
archive configuration
archive configuration location

archive configuration max

display archive configuration
archive configuration max
Use archive configuration max to set the maximum number of configuration archives.
Use undo archive configuration max to restore the default.
Syntax
archive configuration max file-number
undo archive configuration max
Default
The maximum number is 5.
Views
System view
Predefined user roles
network-admin
Parameters
file-number: Specifies the maximum number of configuration archives that can be saved. The value
range is 1 to 10. Adjust the setting depending on the amount of storage space available.
Usage guidelines
Before you can set a limit on configuration archives, use the archive configuration location
command to specify a configuration archive directory and archive file name prefix.
After the maximum number of configuration archives is reached, the system deletes the oldest
archive for the new archive.
182