Issu Commands; Display Install Active - HPE D6020 Maintenance And Service Manual

ISSU commands

Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.

display install active

Use display install active to display active software images.
Syntax
Centralized devices in standalone mode:
display install active [ verbose ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display install active [ slot slot-number ] [ verbose ]
Distributed devices in IRF mode:
display install active [ chassis chassis-number slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays information for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for all IRF members. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for all cards. (Distributed devices in IRF mode.)
verbose: Displays detailed information. If you do not specify this keyword, the command displays
only image names.
Examples
# (Centralized devices in standalone mode.) Display active software images.
<Sysname> display install active
Active packages on the device:
flash:/boot.bin
218