Active packages are consistent with committed packages on their own board.
Active packages are consistent with the reference packages.
Verifying packages on chassis 1 slot 1:
Start to check active package completeness.
Verifying the file flash:/boot-a0101.bin on chassis 1 slot 1.....................Done.
flash:/boot-a0101.bin verification successful.
Verifying the file flash:/system-a0101.bin on chassis 1 slot 1.....................Done.
flash:/system-a0101.bin verification successful.
Start to check active package consistency.
Active packages are consistent with committed packages on their own board.
Active packages are consistent with the reference packages.
Verification is done.
reset install log-history oldest
Use reset install log-history oldest to clear ISSU log entries.
Syntax
reset install log-history oldest log-number
Views
User view
Predefined user roles
network-admin
Parameters
log-number: Specifies the number of ISSU log entries to be deleted.
Usage guidelines
This command clears the specified number of log entries, beginning with the oldest log entry.
Examples
# Clear the two oldest ISSU log entries.
<Sysname> reset install log-history oldest 2
Related commands
display install log
reset install rollback oldest
Use reset install rollback oldest to clear ISSU rollback points.
Syntax
reset install rollback oldest point-id
Views
User view
Predefined user roles
network-admin
Parameters
point-id: Specifies a rollback point by its ID.
252