Display Line - HPE D6020 Maintenance And Service Manual

7: Uses seven data bits for a character.
8: Uses eight data bits for a character.
Usage guidelines
This command is not supported in VTY line class view.
This setting must be the same as the setting on the configuration terminal.
Examples
# Configure AUX 0 to use seven data bits for a character.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] databits 7

display line

Use display line to display user line information.
Syntax
display line [ number1 | { aux | console | tty | vty } number2 ] [ summary ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number1: Specifies the absolute number of a user line.
The following matrix shows the value ranges for the number1 argument:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
aux: Specifies the AUX line.
The following matrix shows the aux keyword and hardware compatibility:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
Value range
0 to 144
0 to 144
0 to 144
0 to 225
0 to 225
0 to 417
0 to 2399
Keyword compatibility
No
No
Yes
55