User-Interface Class - HPE D6020 Maintenance And Service Manual

Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
Usage guidelines
This command is an older version reserved for backward compatibility purposes. It has the same
functionality and output as the line command. As a best practice, use the line command.
To configure settings for a single user line, use this command to enter the user line view.
To configure the same settings for multiple user lines, use this command to enter multiple user line
views.
Examples
# Enter the view of console line 0.
<Sysname> system-view
[Sysname] user-interface console 0
[Sysname-line-console0]
# Enter the views of VTY lines 0 to 4.
<Sysname> system-view
[Sysname] user-interface vty 0 4
[Sysname-line-vty0-4]
Related commands

user-interface class

user-interface class
Use user-interface class to enter user line class view.
Value ranges
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
102
console–0
tty–2 to 80
vty–1 to 63
console–0
tty–2to 80
vty–1 to 63
aux–0
tty–2 to 80
vty–1 to 63
aux–1
tty–2 to 160
vty–1 to 63
aux–0
tty–2 to 160
vty–1 to 63
aux–0
tty–2 to 352
vty–1 to 63
aux–1 to 15
console–1 to 15
tty–2 to 2304
vty–1 to 63