Configuration Encrypt - HPE D6020 Maintenance And Service Manual

<Sysname> backup startup-configuration to 2.2.2.2 192-168-1-26.cfg
Backing up the main startup configuration file to 2.2.2.2...
Done.
# Back up the main next-startup configuration file to the IPv4 TFTP server at 2.2.2.2 in the MPLS
L3VPN instance VPN1, and set the target file name to 192-168-1-26.cfg.
<Sysname> backup startup-configuration to 2.2.2.2 192-168-1-26.cfg vpn-instance VPN1
Backing up the main startup configuration file to 2.2.2.2 in VPN VPN1...
Done.
# Back up the main next-startup configuration file to the IPv6 TFTP server at 2001::2 in the public
network, and set the target file name to 192-168-1-26.cfg.
<Sysname> backup startup-configuration to ipv6 2001::2 192-168-1-26.cfg
Backing up the main startup configuration file to 2001::2...
Done.
Related commands
restore startup-configuration

configuration encrypt

Use configuration encrypt to enable configuration encryption.
Use undo configuration encrypt to disable configuration encryption.
Syntax
configuration encrypt { private-key | public-key }
undo configuration encrypt
Default
Configuration encryption is disabled. The running configuration is saved to a configuration file
without encryption.
Views
System view
Predefined user roles
network-admin
Parameters
private-key: Encrypts configuration with a private key. All devices running Comware 7 software use
the same private key.
public-key: Encrypts configuration with a public key. All devices running Comware 7 software use
the same public key.
Usage guidelines
Configuration encryption enables the device to automatically encrypt a configuration file when saving
the running configuration to the file.
Only devices running Comware 7 software can decrypt the encrypted configuration file.
Examples
# Enable the public-key method for configuration encryption.
<Sysname> system-view
[Sysname] configuration encrypt public-key
184