Time Repeating - HPE D6020 Maintenance And Service Manual

week-day week-day&<1-7>: Specifies a space-separated list of up to seven week days for the
schedule. Valid week day values include Mon, Tue, Wed, Thu, Fri, Sat, and Sun.
delay time: Specifies the delay time for executing the schedule, in the hh:mm or mm format. This
argument can have up to six characters. When in the hh:mm format, mm must be in the range of 0 to
59.
Usage guidelines
If the specified time has already occurred, the schedule will be executed at the specified time the
following day.
If the day in the month has already occurred, the schedule will be executed at the specified day in the
following month.
If the specified day in a week has already occurred, the schedule will be executed at the specified
day in the following week.
The time at command, the time once command, and the time repeating command overwrite one
another. The most recently configured command takes effect.
Examples
# Configure the device to execute schedule saveconfig once at 15:00.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time once at 15:00
Schedule starts at 15:00 5/11/2016.
# Configure the device to execute schedule saveconfig once at 15:00 on the coming 15th day in a
month.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time once at 15:00 month-date 15
# Configure the device to execute schedule saveconfig at 12:00 p.m. on the coming Monday and
Friday.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time once at 12:00 week-day mon fri
# Configure the device to execute schedule saveconfig after 10 minutes.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time once delay 10
Related commands
scheduler schedule

time repeating

Use time repeating to specify an execution time table for a periodic schedule.
Use undo time to delete the execution time table configuration for a periodic schedule.
Syntax
time repeating [ at time [ date ] ] interval interval
time repeating at time [ month-date [ month-day | last ] | week-day week-day&<1-7> ]
undo time
348