Install Deactivate - HPE D6020 Maintenance And Service Manual

Examples
# Commit software changes.
<Sysname> install commit
This operation will take several minutes, please wait...........................Done.
Related commands
install activate

install deactivate

install rollback
install deactivate
Use install deactivate to deactivate feature images and patch images.
Syntax
Centralized devices in standalone mode:
install deactivate feature filename&<1-30>
install deactivate patch filename
Distributed devices in standalone mode/centralized devices in IRF mode:
install deactivate feature filename&<1-30> slot slot-number
install deactivate patch filename { all | slot slot-number }
Distributed devices in IRF mode:
install deactivate feature filename&<1-30> chassis chassis-number slot slot-number
install deactivate patch filename chassis chassis-number { all | slot slot-number }
Views
User view
Predefined user roles
network-admin
Parameters
feature: Specifies feature image files. You can specify a space-separated list of up to 30 feature
image files.
patch: Specifies a patch image file.
filename: Specifies a .bin file in the filesystemname/filename.bin format. The file must be saved in
the root directory of a file system on the device (centralized device in standalone mode) or on the
specified slot. This argument cannot contain slot or chassis information and can have a maximum of
63 characters.
all: Specifies all cards on which the specified patch image file has been activated. (Distributed
devices in standalone mode.)
all: Specifies all member devices on which the specified patch image file has been activated.
(Centralized devices in IRF mode.)
all: Specifies all cards on which the specified patch image file has been activated. (Distributed
devices in standalone mode.)
slot slot-number: Specifies a card by its slot number. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. (Centralized devices in IRF
mode.)
246