Permit Interface - HPE D6020 Maintenance And Service Manual

[Sysname-role-role1-ifpolicy] permit interface gigabitethernet 1/0/1 to gigabitethernet
1/0/5
Related commands
display role

permit interface

role
permit interface
Use permit interface to configure a list of interfaces accessible to a user role.
Use undo permit interface to disable the access of a user role to specific interfaces.
Syntax
permit interface interface-list
undo permit interface [ interface-list ]
Default
No permitted interfaces are configured in user role interface policy view.
Views
User role interface policy view
Predefined user roles
network-admin
Parameters
interface-list: Specifies a space-separated list of up to 10 interface items. Each interface item
specifies one interface in the interface-type interface-number form or a range of interfaces in the
interface-type interface-number to interface-type interface-number form. If you specify an interface
range, the end interface must meet the following requirements:
•
Be the same type as the start interface.
•
Have a higher interface number than the start interface.
Usage guidelines
To permit a user role to access an interface after you configure the interface policy deny command,
you must add the interface to the permitted interface list of the policy. With the user role, you can
perform the following tasks to the interfaces in the permitted interface list:
•
Create, remove, or configure the interfaces.
•
Enter the interface views.
•
Specify the interfaces in feature commands.
The create and remove operations are available only for logical interfaces.
You can repeat the permit interface command to add multiple permitted interfaces to a user role
interface policy.
The undo permit interface command removes the entire list of permitted interfaces if you do not
specify an interface.
Any change to a user role interface policy takes effect only on users who log in with the user role after
the change.
Examples
1. Configure user role role1:
29