Reboot - HPE D6020 Maintenance And Service Manual

[Sysname] power-supply policy redundant 3
# (Distributed devices in IRF mode.) Set the number of redundant power supplies on IRF member
device 1 to 3.
<Sysname> system-view
[Sysname] power-supply policy chassis 1 redundant 3

reboot

Use reboot to reboot the device or a subcard. (Centralized devices in standalone mode.)
Use reboot to reboot a card, a subcard, or the entire system. (Distributed devices in standalone
mode.)
Use reboot to reboot an IRF member device, a subcard, or all IRF member devices. (Centralized
devices in IRF mode.)
Use reboot to reboot an IRF member device, a subcard, or all IRF member devices. (Distributed
devices in IRF mode.)
Syntax
Centralized devices in standalone mode:
reboot [ subslot subslot-number ] [ force ]
Distributed devices in standalone mode/centralized devices in IRF mode:
reboot [ slot slot-number [ subslot subslot-number ] ] [ force ]
Distributed devices in IRF mode:
reboot [ chassis chassis-number [ slot slot-number [ subslot subslot-number ] ] ] [ force ]
Views
User view
Predefined user roles
network-admin
Parameters
chassis chassis-number: Specifies an IRF member device by its member ID. (Distributed devices in
IRF mode.)
slot slot-number: Specifies a card by its slot number. (Distributed devices in standalone mode.)
slot slot-number: Specifies a card by its slot number. (Distributed devices in IRF mode.)
slot slot-number: Specifies an IRF member device by its member ID. (Centralized devices in IRF
mode.)
subslot subslot-number: Specifies a subcard by its subslot number.
force: Reboots the device immediately without performing software or hard disk check. If this
keyword is not specified, the system first identifies whether the reboot might result in data loss or a
system failure. For example, the system identifies whether the main system software image file
exists and whether a write operation is in progress on a storage medium. If the reboot might cause
problems, the system does not reboot the device.
336