Parity; Protocol Inbound - HPE D6020 Maintenance And Service Manual

<Sysname> lock reauthentication
Please press Enter to unlock the screen.
// The user line is locked. To unlock it, press Enter and enter the login password:
Password:
<Sysname>
Related commands
lock-key

parity

Use parity to specify the parity.
Use undo parity to restore the default.
Syntax
parity { even | mark | none | odd | space }
undo parity
Default
The setting is none. No parity is used.
Views
User line view
Predefined user roles
network-admin
Parameters
even: Uses even parity.
mark: Uses mark parity.
none: Uses no parity.
odd: Uses odd parity.
space: Uses space parity.
Usage guidelines
This command is not supported in VTY line view.
The configuration terminal and the device must use the same parity.
Examples
# Configure the user line AUX 0 to use odd parity.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] parity odd

protocol inbound

Use protocol inbound to specify the supported protocols.
Use undo protocol inbound to restore the default.
79