Reset Scheduler Logfile - HPE D6020 Maintenance And Service Manual

slot slot-number : Specifies an IRF member device by its member ID. (Centralized devices in IRF
mode.)
chassis chassis-number: Specifies an IRF member device by its member ID. (Distributed devices in
IRF mode.)
Usage guidelines
CAUTION:
Unmounting an HMIM module stops all services provided by the module.
The following matrix shows the command and hardware compatibility:
Hardware
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A)
MSR958 (JH300A/JH301A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
Unmount an HMIM module before removing the module from the device. If you remove an HMIM
module that is not unmounted, the device might fail or be damaged.
An unmounted HMIM module is not visible or configurable.
Examples
# (Centralized devices in standalone mode/distributed devices in standalone mode.) Unmount the
HMIM module in slot 6.
<Sysname> remove hmimslot 6
You can remove the card now!
# (Centralized devices in IRF mode.) Unmount the HMIM module in slot 6 of member device 1.
<Sysname> remove slot 1 hmimslot 6
You can remove the card now!
# (Distributed devices in IRF mode.) Unmount the HMIM module in slot 6 of member device 1.
<Sysname> remove chassis 1 hmimslot 6
You can remove the card now!

reset scheduler logfile

Use reset scheduler logfile to clear job execution log information.
Syntax
reset scheduler logfile
Views
User view
Predefined user roles
network-admin
Command compatibility
No
No
No
No
No
Yes
Yes
340