Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the automatic reboot schedule.
<Sysname> display scheduler reboot
System will reboot at 16:32:00 05/23/2016 (in 1 hours and 39 minutes).
Related commands
scheduler reboot at
scheduler reboot delay
display scheduler schedule
Use display scheduler schedule to display schedule information.
Syntax
display scheduler schedule [ schedule-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
schedule-name: Specifies a schedule by its name, a case-sensitive string of 1 to 47 characters. If
you do not specify a schedule, this command displays information about all schedules.
Examples
# Display information about all schedules.
<Sysname> display scheduler schedule
Schedule name
Schedule type
Start time
Last execution time
Last completion time : Tue Dec 27 10:44:47 2016
Execution counts
-----------------------------------------------------------------------
Job name
shutdown
Table 50 Command output
Field
Schedule type
: shutdown
: Run once after 0 hours 2 minutes
: Tue Dec 27 10:44:42 2016
: Tue Dec 27 10:44:42 2016
: 1
Description
Execution time setting of the schedule. If no execution time is specified, this field is not
displayed.
Last execution status
Successful
314