Redirect Passthrough - HPE D6020 Maintenance And Service Manual

Views
AUX line view
TTY line view
Predefined user roles
network-admin
Parameters
port-number: Specifies the number of the Telnet redirect listening port, in the range of 2000 to 50000.
Usage guidelines
The device redirects only Telnet connection requests destined for the Telnet redirect listening port.
Examples
# Set the Telnet redirect listening port number to 3000.
<Sysname> system-view
[Sysname] line tty 1
[Sysname-line-tty1] redirect listen-port 3000
Related commands
display tcp (Layer 3—IP Services Command Reference)
redirect enable

redirect passthrough

Use redirect passthrough to enable the passthrough packet redirect mode.
Use undo redirect passthrough to restore the default.
Syntax
redirect passthrough
undo redirect passthrough
Default
The passthrough packet redirect mode is disabled. The Telnet redirect server processes packets as
dictated by the standard Telnet protocol before sending the packets to the destination device.
Views
AUX line view
TTY line view
Predefined user roles
network-admin
Usage guidelines
In passthrough mode, the Telnet redirect server forwards packets without processing the packets.
If the Telnet user and the destination device are not using the standard Telnet protocol, you must set
the packet redirect mode to passthrough on the redirect server.
Examples
# Enable the passthrough packet redirect mode for TTY line 1.
<Sysname> system-view
[Sysname] line tty 1
83