Ftp - HPE D6020 Maintenance And Service Manual

<Sysname> display ftp client source
The source IP address of the FTP client is 1.1.1.1.
The source IPv6 address of the FTP client is 2001::1.

ftp

Use ftp to log in to an FTP server and enter FTP client view.
Syntax
ftp [ ftp-server [ service-port ] [ vpn-instance vpn-instance-name ] [ dscp dscp-value | source
{ interface interface-type interface-number | ip source-ip-address } ] ] *
Views
User view
Predefined user roles
network-admin
Parameters
ftp-server: Specifies the IPv4 address or host name of an FTP server. A host name can be a
case-insensitive string of 1 to 253 characters. Valid characters for a host name include letters, digits,
hyphens (-), underscores (_), and dots (.).
service-port: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The
default is 21.
vpn-instance vpn-instance-name: Specifies the VPN instance to which the FTP server belongs. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the FTP server
belongs to the public network, do not specify this option.
dscp dscp-value: Specifies the DSCP value for IPv4 to use in outgoing FTP packets to indicate the
packet transmission priority. The value range is 0 to 63. The default is 0.
source { interface interface-type interface-number | ip source-ip-address }: Specifies the source
address used to establish the FTP connection.
•
interface interface-type interface-number: Specifies an interface by its type and number. The
device will use the interface's primary IPv4 address as the source address. To establish the FTP
connection successfully, make sure the interface is up and has the primary IPv4 address
configured.
•
ip source-ip-address: Specifies an IPv4 address. To establish the FTP connection successfully,
make sure this address is the IPv4 address of an interface in up state on the device.
Usage guidelines
This command is only applicable to IPv4 networks.
If no parameters are specified, this command enters the FTP client view without logging in to an FTP
server.
If the server parameters are specified, you are prompted to enter the username and password for
logging in to the FTP server.
Examples
# Log in to the FTP server 192.168.0.211. Use the source IPv4 address of 192.168.0.212 for
outgoing FTP packets.
<Sysname>ftp 192.168.0.211 source ip 192.168.0.212
Press CTRL+C to abort.
Connected to 192.168.0.211 (192.168.0.211).
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
121