Screen-Length - HPE D6020 Maintenance And Service Manual

TTY line view
Predefined user roles
network-admin
Parameters
time: Specifies the idle-timeout timer in seconds. The value range is 30 to 86400. To disable the
timeout mechanism, set the timeout timer to 0.
Usage guidelines
If no data is received from a Telnet client before the timer expires, the user line terminates the
redirected connection.
Examples
# Set the idle-timeout timer to 200 seconds for the redirected Telnet connection.
<Sysname> system-view
[Sysname] line tty 1
[Sysname-line-tty1] redirect timeout 200
Related commands
redirect enable

screen-length

Use screen-length to set the maximum number of lines of command output to send to the terminal
at a time when the screen pausing feature is enabled.
Use undo screen-length to restore the default.
Syntax
screen-length screen-length
undo screen-length
Default
A maximum of 24 lines are sent.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
screen-length: Specifies the maximum number of lines to send, in the range of 0 to 512. To send
command output without pausing, set the number to 0 or execute the screen-length disable
command.
Usage guidelines
The number of lines that can be displayed on the terminal screen is restricted by both this setting and
the display specification of the terminal. For example, if this setting is 40, the device sends 40 lines to
the terminal at a time. If the terminal display specification is 24 lines, only the last 24 lines are
displayed on the terminal screen. To view the previous 16 lines, you must press PgUp.
To continue to display command output after a pause, press the space bar.
85