Clock Summer-Time - HPE D6020 Maintenance And Service Manual

clock summer-time

Use clock summer-time to set the daylight saving time.
Use undo clock summer-time to restore the default.
Syntax
clock summer-time name start-time start-date end-time end-date add-time
undo clock summer-time
Default
The daylight saving time is not set.
Views
System view
Predefined user roles
network-admin
Parameters
name: Specifies a name for the daylight saving time schedule, a case-sensitive string of 1 to 32
characters.
start-time: Specifies the start time in the hh:mm:ss format. The value range for hh is 0 to 23. The
value range for mm is 0 to 59. The value range for ss is 0 to 59. The leading zero in a segment can be
omitted. If the seconds segment is 0 (hh:mm:00), you can omit it. If both the minutes and seconds
segments are 0 (hh:00:00), you can omit both of the segments. For example, to specify 08:00:00,
you can enter 8.
start-date: Specifies the start date in one of the following formats:
•
MM/DD. The value range for MM is 1 to 12. The value range for DD varies by month.
•
month week day, where:
month—Takes January, February, March, April, May, June, July, August, September,

October, November or December.
week—Represents week of the month. It takes first, second, third, fourth, fifth, or last.

day—Takes Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, or Saturday.

end-time: Specifies the end time in the hh:mm:ss format. The value range for hh is 0 to 23. The value
range for mm is 0 to 59. The value range for ss is 0 to 59. The leading zero in a segment can be
omitted. If the seconds segment is 0 (hh:mm:00), you can omit it. If both the minutes and seconds
segments are 0 (hh:00:00), you can omit both of the segments. For example, to specify 08:00:00,
you can enter 8.
end-date: Specifies the end date in one of the following formats:
•
MM/DD. The value range for MM is 1 to 12. The value range for DD varies by month.
•
month week day, where:
month—Takes January, February, March, April, May, June, July, August, September,

October, November or December.
week—Represents week of the month. It takes first, second, third, fourth, fifth, or last.

day—Takes Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, or Saturday.

add-time: Specifies the time to be added to the standard time, in the hh:mm:ss format. The value
range for hh is 0 to 23. The value range for mm is 0 to 59. The value range for ss is 0 to 59. The
leading zero in a segment can be omitted. If the seconds segment is 0 (hh:mm:00), you can omit it. If
both the minutes and seconds segments are 0 (hh:00:00), you can omit both of the segments. For
example, to specify 08:00:00, you can enter 8.
281