Telnet Server Ipv6 Port; Telnet Server Port - HPE D6020 Maintenance And Service Manual

telnet server ipv6 port

Use telnet server ipv6 port to specify the IPv6 Telnet service port number.
Use undo telnet server ipv6 port to restore the default.
Syntax
telnet server ipv6 port port-number
undo telnet server ipv6 port
Default
The IPv6 Telnet service port number is 23.
Views
System view
Predefined user roles
network-admin
Parameters
port-number: Specifies a port number. The value can be 23 or in the range of 1025 to 65535.
Usage guidelines
This command terminates all Telnet connections to the IPv6 Telnet server. To use the Telnet service,
you must reestablish Telnet connections.
Examples
# Set the IPv6 Telnet service port number to 1026.
<Sysname> system-view
[Sysname] telnet server ipv6 port 1026

telnet server port

Use telnet server port to specify the IPv4 Telnet service port number.
Use undo telnet server port to restore the default.
Syntax
telnet server port port-number
undo telnet server port
Default
The IPv4 Telnet service port number is 23.
Views
System view
Predefined user roles
network-admin
Parameters
port-number: Specifies a port number. The value can be 23 or in the range of 1025 to 65535.
Usage guidelines
This command terminates all Telnet connections to the IPv4 Telnet server. To use the Telnet service,
you must reestablish Telnet connections.
98