Restore Factory-Default; Scheduler Job - HPE D6020 Maintenance And Service Manual

Examples
# Clear job execution log information.
<Sysname> reset scheduler logfile
Related commands
display scheduler logfile

restore factory-default

Use restore factory-default to restore the factory-default configuration for the device.
Syntax
restore factory-default
Views
User view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
This command is disruptive. Use this command only when you cannot troubleshoot the device by
using other methods, or you want to use the device in a different scenario.
Examples
# Restore the factory-default configuration for the device.
<Sysname> restore factory-default
This command will restore the system to the factory default configuration and clear the
operation data. Continue [Y/N]:y
Restoring the factory default configuration. This process might take a few minutes. Please
wait.................................................................................
.........................Done.
Please reboot the system to place the factory default configuration into effect.
Related commands
reboot

scheduler job

Use scheduler job to create a job and enter its view, or enter the view of an existing job.
Use undo scheduler job to delete a job.
Syntax
scheduler job job-name
undo scheduler job job-name
Default
No job exists.
Views
System view
341