Boot-Loader Update - HPE D6020 Maintenance And Service Manual

The images that have passed all examinations will be used as the main startup software
images at the next reboot on slot 0.
# (Centralized devices in IRF mode.) Specify flash:/all.ipe as the main startup image file for IRF
member device 1.
<Sysname> boot-loader file flash:/all.ipe slot 1 main
Verifying the IPE file and the images............Done.
xx Router images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:Y
Add images to slot 1.
File flash:/boot.bin already exists on slot 1.
File flash:/system.bin already exists on slot 1.
Overwrite the existing files? [Y/N]:Y
Decompressing file boot.bin to flash:/boot.bin........................Done.
Decompressing file system.bin to flash:/system.bin...............................Done.
The images that have passed all examinations will be used as the main startup software
images at the next reboot on slot 1.
# (Distributed devices in IRF mode.) Specify flash:/all.ipe as the main startup image file for the MPU
in slot 0 on IRF member device 1.
<Sysname> boot-loader file flash:/all.ipe chassis 1 slot 0 main
Verifying the IPE file and the images............Done.
xx Router images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:Y
Add images to chassis 1 slot 0.
File flash:/boot.bin already exists on chassis 1 slot 0.
File flash:/system.bin already exists on chassis 1 slot 0.
Overwrite the existing files? [Y/N]:Y
Decompressing file boot.bin to flash:/boot.bin........................Done.
Decompressing file system.bin to flash:/system.bin...............................Done.
The images that have passed all examinations will be used as the main startup software
images at the next reboot on chassis 1 slot 0.
Related commands
display boot-loader

boot-loader update

Distributed devices in standalone mode:
Use boot-loader update to synchronize startup images from the active MPU to the standby MPU.
Centralized devices in IRF mode:
Use boot-loader update to synchronize startup images from the master to a subordinate device.
Distributed devices in IRF mode:
Use boot-loader update to synchronize startup images from the global active MPU to a standby
MPU.
208