HPE D6020 Maintenance And Service Manual page 258

Views
User view
Predefined user roles
network-admin
Usage guidelines
To ensure a successful ISSU and make sure the system can start up and operate correctly after an
ISSU, execute this command to verify the following items:
•
Integrity—Verify that the boot, system, and feature images are integral.
•
Consistency—Verify that the same active images are running across the entire system.
•
Software commit status—Verify that the active images are committed as needed.
If a software image fails the verification, perform the following tasks to resolve the problem:
•
To ensure software integrity, download and install the software images again.
•
To guarantee software image consistency or change software commit status, use the install
activate, install deactivate, and install commit commands as appropriate.
Examples
# (Centralized devices in standalone mode.) Verify the software change confirmation status and
software image integrity and consistency.
<Sysname> install verify
Active packages on the device are the reference packages.
Packages will be compared with the reference packages.
This operation will take several minutes, please wait...
Verifying packages on the device:
Start to check active package completeness.
Verifying the file flash:/boot-a0101.bin on the device...........Done.
flash:/boot-a0101.bin verification successful.
Verifying the file flash:/system-a0101.bin on the device............Done.
flash:/system-a0101.bin verification successful.
Start to check active package consistency.
Active packages are consistent with committed packages on their own board.
Active packages are consistent with the reference packages.
Verification is done.
# (Distributed devices in standalone mode.) Verify the software change confirmation status and
software image integrity and consistency.
<Sysname> install verify
Active packages on slot 1 are the reference packages.
Packages will be compared with the reference packages.
This operation will take several minutes, please wait...
Verifying packages on slot 0:
Start to check active package completeness.
Verifying the file flash:/boot-a0101.bin on slot 0.....................Done.
flash:/boot-a0101.bin verification successful.
Verifying the file flash:/system-a0101.bin on slot 0.....................Done.
flash:/system-a0101.bin verification successful.
Start to check active package consistency.
Active packages are consistent with committed packages on their own board.
Active packages are consistent with the reference packages.
250