Display Device Manuinfo - HPE D6020 Maintenance And Service Manual

# (Distributed devices in IRF mode.) Display device information about all IRF member devices.
<Sysname> display device
Chassis Slot Type
1 0
1 1
1 2
1 3
1 4
2 0
2 1
2 2
The output shows that the IRF fabric has two member devices (with the member IDs 1 and 2). The
card in slot 0 on member device 1 is the global active MPU. The cards in slot 0 and slot 1 on member
device 2 are global standby MPUs.
Table 44 Command output
Field
Chassis
Slot
Type
State
Subslot
Soft Ver
Patch Ver

display device manuinfo

Use display device manuinfo to display electronic label information for the device.
Syntax
Centralized devices in standalone mode:
display device manuinfo [ slot slot-number ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display device manuinfo [ slot slot-number [ subslot subslot-number ] ]
Distributed devices in IRF mode:
display device
subslot-number ] ] ]
Views
Any view
State
MPU-100 Master
NONE Absent
SPU-300 Normal
NONE Absent
SPU-300 Normal
MPU-100 Standby
MPU-100 Standby
SPU-300 Normal
Description
Member ID of the IRF member device.
Number of the slot where the card on the IRF member device resides.
Card type.
Card status:
•
Absent—No card is inserted in the slot.
•
Master—The card is the global active MPU.
•
Standby—The card is a global standby MPU.
•
Normal—The card is an interface card and is operating correctly.
•
Fault—The card is faulty.
Maximum number of subcards that the card supports.
Software version of the card.
Patch version of the card. If no patch is installed, the value of this field is None.
manuinfo [ chassis
Subslot Soft Ver
0 AAAAAA-0000
0 NONE
0 AAAAAA-0000
0 NONE
0 AAAAAA-0000
0 AAAAAA-0000
0 AAAAAA-0000
0 AAAAAA-0000
chassis-number [ slot
297
Patch Ver
None
None
None
None
None
None
None
None
slot-number [ subslot