Return; Screen-Length Disable - HPE D6020 Maintenance And Service Manual

33% in last 5 seconds
32% in last 1 minute
33% in last 5 minutes
<Sysname> display clock
12:20:28 UTC Thu 06/19/2014
Related commands
display history-command
escape-key
history-command max-size

return

Use return to return to user view from any other view.
Syntax
return
Views
Any view except user view
Predefined user roles
network-admin
network-operator
Usage guidelines
Pressing Ctrl+Z has the same effect as the return command.
Examples
# Return to user view from GigabitEthernet 1/0/1 interface view.
[Sysname-GigabitEthernet1/0/1] return
<Sysname>

screen-length disable

Use screen-length disable to disable pausing between screens of output for the current CLI
session.
Use undo screen-length disable to enable pausing between screens of output for the current CLI
session.
Syntax
screen-length disable
undo screen-length disable
Default
The default depends on the configuration of the screen-length command in user line view.
The following are the default settings for the screen-length command:
•
Pausing between screens of output.
•
Displaying up to 24 lines on a screen.
12