Time Once - HPE D6020 Maintenance And Service Manual

Views
Schedule view
Predefined user roles
network-admin
Parameters
time: Specifies the schedule execution time in the hh:mm format. The value range for hh is 0 to 23.
The value range for mm is 0 to 59.
date: Specifies the schedule execution date in the MM/DD/YYYY or YYYY/MM/DD format. The value
range for YYYY is 2000 to 2035. The value range for MM is 1 to 12. The value range for DD varies by
month.
Usage guidelines
The specified time (date plus time) must be later than the current system time.
The time at command, the time once command, and the time repeating command overwrite one
another. The most recently configured command takes effect.
Examples
# Configure the device to execute schedule saveconfig at 01:01 a.m. on May 11, 2016.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time at 1:1 2016/05/11
Related commands
scheduler schedule

time once

Use time once to specify one or more execution days and the execution time for a non-periodic
schedule.
Use undo time to delete the execution day and time configuration for a non-periodic schedule.
Syntax
time once at time [ month-date month-day | week-day week-day&<1-7> ]
time once delay time
undo time
Default
No execution time or day is specified for a non-periodic schedule.
Views
Schedule view
Predefined user roles
network-admin
Parameters
at time: Specifies the execution time in the hh:mm format. The value range for hh is 0 to 23. The
value range for mm is 0 to 59.
month-date month-day: Specifies a day in the current month, in the range of 1 to 31. If you specify a
day that does not exist in the current month, the configuration takes effect on that day in the next
month.
347