Display Startup - HPE D6020 Maintenance And Service Manual

2. If only the backup startup configuration file is available, this command displays the contents of
the backup file.
3. If both the main and backup startup configuration files are not available, this command does not
display anything.
Examples
# Display the contents of the configuration file for the next system startup.
<Sysname> display saved-configuration
#
version 1.00, Alpha 2009
#
sysname Sysname
#
ftp server enable
#
telnet server enable
#
domain default enable system
#
vlan 1
#
domain system
#
---- More ----
Related commands
reset saved-configuration
save

display startup

Use display startup to display the names of the current startup configuration file and the
next-startup configuration files.
Syntax
display startup
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Current startup configuration file is the configuration file that has been loaded. Next-startup
configuration file is the configuration file used at the next startup.
(Distributed devices in standalone mode.) The standby MPU always uses the same current startup
configuration file as the active MPU. After an active/standby switchover, it is normal that the current
startup configuration files on the MPUs are displayed as NULL. This is because the new active MPU
continues to run with the running configuration rather than rebooting with a startup configuration file.
192