Emergency Shell Commands; Copy - HPE D6020 Maintenance And Service Manual

Emergency shell commands

Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
File system names, directory names, or file names must be compliant with the naming conventions.
For more information about the naming conventions and the methods for specifying the names, see
Fundamentals Configuration Guide.
Unless otherwise stated, a file or directory name argument in this chapter must contain the file
system name. The path information might contain multiple levels of directories, each of which can
have 1 to 255 characters. The file name alone (without the path information) can include 1 to 255
characters. The entire argument, including the file system name, the path information, and the file
name, can have 1 to 511 characters. (Centralized devices in standalone mode.)
Unless otherwise stated, a file or directory name argument in this document must contain the storage
medium and cannot contain slot information. The path information might contain multiple levels of
directories, each of which can have 1 to 255 characters. The file name alone (without the path
information) can have 1 to 255 characters. The entire argument, including the file system name, the
path information, and the file name, can have 1 to 511 characters. (Distributed devices in standalone
mode/centralized devices in IRF mode.)
Unless otherwise stated, a file or directory name argument in this document must contain the file
system name and cannot contain chassis or slot information. The path information might contain
multiple levels of directories, each of which can have 1 to 255 characters. The file name alone
(without the path information) can have 1 to 255 characters. The entire argument, including the file
system name, the path information, and the file name, can include 1 to 511 characters. (Distributed
devices in IRF mode.)

copy

Use copy to copy a file.
Syntax
copy fileurl-source fileurl-dest
Views
User view
Parameters
fileurl-source: Specifies the file to be copied.
fileurl-dest: Specifies the destination file or directory. If you specify a destination directory, the
system uses the name of the source file as the file name.
Usage guidelines
If the destination file already exists, the system prompts whether or not to overwrite it. If you enter Y,
the existing file is overwritten. If you enter N, the command is not executed.
254