Databits - HPE D6020 Maintenance And Service Manual

undo command authorization
Default
Command authorization is disabled. Logged-in users can execute commands without authorization.
Views
User line view
User line class view
Predefined user roles
network-admin
Usage guidelines
When command authorization is enabled, a user can only use commands that are permitted by both
the AAA scheme and user role.
A configuration change made by this command does not take effect for the current session. It takes
effect for subsequent login sessions.
If you configure the command authorization command in user line class view, command
authorization is enabled for all user lines in the class. You cannot configure the undo command
authorization command in the view of a user line in the class.
Examples
# Enable command authorization for VTY line 0.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] command authorization
Related commands
authorization command (Security Command Reference)
command accounting

databits

Use databits to specify the number of data bits for a character.
Use undo databits to restore the default.
Syntax
databits { 5 | 6 | 7 | 8 }
undo databits
Default
Eight data bits are used for a character.
Views
User line view
Predefined user roles
network-admin
Parameters
5: Uses five data bits for a character. This keyword is available only for modem dial-in.
6: Uses six data bits for a character. This keyword is available only for modem dial-in.
54