Understanding Device Bay Id Numbers - HPE D6020 User Manual

Table 4 Rear panel LED and button descriptions (continued)
Item Description
7 I/O module LED
8 7-segment display
9 UID button/LED (Drawer 1)
1
If the GSI is amber, the system needs service. Activate the associated drawer UID button to view any GSI error codes
on the rear display.

Understanding device bay ID numbers

Figure 5 Device bay ID numbers
Status
LED Status
Blue Green Amber
Off Off Off
Off On Off
Blink Off On
On Off On
On or On Off
Blink
Refer to Table 8 (page 31)
Blue = UID LED is enabled from the UID button.
Blue solid = System is in hard drive Locate mode, or an enclosure
firmware update is in progress.
Off = UID LED is disabled.
Understanding device bay ID numbers
Definition (Locate/Safe to
Remove Behavior)
No power.
Healthy.
Faulty.
Locate mode/Do not remove.
Faulty.
Locate mode/Safe to remove.
Healthy.
Manual locate/Safe to remove.
for more information
9