Understanding Device Bay Id Numbers - HPE D6020 Maintenance And Service Manual

Table 4 Rear panel LED and button descriptions (continued)
Item Description
7 I/O module LED
8 7-segment display
9 UID button/LED (Drawer 1)
1
If the GSI is amber, the system needs service. Activate the associated drawer UID button to view any GSI error codes
on the rear display.

Understanding device bay ID numbers

Figure 28 Device bay ID numbers
Status
LED Status
Blue Green Amber
Off Off Off
Off On Off
Blink Off On
On Off On
On or On Off
Blink
Refer to Table 8 (page 42)
Blue = UID LED is enabled from the UID button.
Blue solid = System is in hard drive Locate mode, or an enclosure
firmware update is in progress.
Off = UID LED is disabled.
Understanding device bay ID numbers
Definition (Locate/Safe to
Remove Behavior)
No power.
Healthy.
Faulty.
Locate mode/Do not remove.
Faulty.
Locate mode/Safe to remove.
Healthy.
Manual locate/Safe to remove.
for more information
37