Digi TransPort WR31 User Manual page 588

Configure legacy protocols
CLR command: Clear an X.25 Call
The CLR command clears the current call and release the associated virtual channel for further
calls. On completion of call clear, the PAD> prompt is re-displayed. Several other situations can
clear a call. If one of these situations occurs, a message is issued to the PAD in the following format:
CLR <Reason> C:<n> - <text>
where:
<Reason> is a 2/3 character clear down code
▪
<n> is the numeric equivalent of the clear down code
▪
<text> is a description of the reason for clear down
▪
The clear down reason codes supported by the router are listed in the following table:
Reason Code
DTE
OOC
INV
NC
DER
NA
NP
RPE
ERR
ROO
RNA
ID
FNA
SA
If an unknown reason code is received, the text field is blank.
Digi TransPort WR Routers User Guide
Numeric Code Text
0 by remote device
1 number busy
3 invalid facility requested
5 temporary network problem
9 number out of order
11 access to this number is barred
13 number not assigned
17 remote procedure error
19 local procedure error
21 cannot be routed as requested
25 reverse charging not allowed
33 incompatible destination
41 fast select not allowed
57 ship cannot be contacted
Configure X.25 parameters
588