Digi TransPort WR31 User Manual page 492

Configure FTP Relay
Remote directory
The full name of the directory on the FTP host to which the file is to be saved.
Rename file
When enabled, the router stores the uploaded files internally with a filename in the form
relnnnn, where nnnn is a number that is incremented for each new file received. When the file is
relayed to the FTP host, the router uses the original filename. When unchecked, the file is stored
internally using its original filename. This parameter should be set if it a file having a filename
longer than 12 characters is to be uploaded. This is because the internal file system uses the 8.3
filename format, such as autoexec.bat.
Transfer Mode ASCII / Binary
These two radio buttons select between the two possible file transfer modes, binary data or
ASCII data.
Transfer Command STORE / APPEND
These two radio buttons select between the two possible storage methods, either append to or
replace existing file.
Attempt to connect to the FTP Server n times
The number of connection attempts that the router should make if the first attempt is not
successful.
Wait s seconds between attempts
The interval, in seconds, the router should wait in between successive connections attempts.
Remain connected for s seconds after a file has been transferred
How long, in seconds, the router maintains the connection to the FTP host after transferring a
file.
If unable to relay file Delete File / Retain file
These two radio buttons select the behavior with respect to storing the file if the router fails to
connect to the FTP host (after retrying for the specified number of attempts). Select Delete File
if the file should not be stored permanently. If the file is retained, manual intervention is
required to recover it at a later stage.
Note If the file is not retained, it will be lost if the power is removed from the router.
Email the file before storing or deleting it
The configuration options following setting are normally disabled (they should appear disabled
in the browser). When this setting is enabled, the parameters are enabled and you can enter
data in the text boxes.
Digi TransPort WR Routers User Guide
FTP Relay n parameters
492