Digi TransPort WR31 User Manual page 541

Configure legacy protocols
Use ASCII character x as the delimiter character
The character for separating a main NUA from a backup NUA, and a main NUI from a backup NUI
in an ATD command. The default value is the ASCII ! character (decimal 33).
Forward mode time x milliseconds
If not framed with STX and ETX characters, can still have data formatted after this period.
Create an event when reply from X.25 host matches
Used to generate a data trigger event (code 47) when the reply from the X.25 host contains the
string specified in this parameter. You can configure the router to generate an email alert
message when this event occurs. See file LOGCODES.TXT for a complete list of events.
XoT/TCP settings
Connect to remote IP address
When the router is configured for XOT or TCP socket mode, this parameter sets the IP address of
the host to which the TCP/XOT connection is made. The transport protocol must be set to TCP.
Port
When making a TCP socket connection (such as the transport protocol has been set to TCP not
XoT), this parameter sets the TCP port number to use.
IP length header
When making a TCP socket connection (such as the transport protocol has been set to TCP),
setting this parameter to On will pre-pend the data sent to the host with a 2-byte length header.
The 2-byte length header is not included in the length calculation. When set to 8583 Ascii 4 byte,
the IP length header conforms to the ISO 8583 format. Setting this parameter to On Inclusive
pre-pends a 2-byte length header, and the calculation of the length includes the 2 bytes of the
length header.
Digi TransPort WR Routers User Guide
Configure TPAD parameters
541