Reboot The Router - Digi TransPort WR31 User Manual

Device administration

Reboot the router

To reboot the router immediately or at a scheduled time, select Administration > Reboot.
The router performs a reboot after any FLASH write operations are completed. Also, one second
each is allowed for the following operations to be completed before reboot will occur:
IPSec SA delete notifications are created and sent
▪
TCP sockets are closed
▪
PPP interfaces are disconnected
▪
Immediately
Causes the router to reboot after a few seconds. The router cleanly terminates any TCP and VPN
connections before rebooting.
In h hrs m mins s secs
Schedules a reboot to occur after the configured period of time. To cancel a scheduled reboot,
enter the reboot cancel command from the command line.
Reboot button
Reboots the router or sets the scheduled reboot to occur.
Related CLI commands
Command Options
reboot n/a
reboot 0-86400
reboot cancel
Digi TransPort WR Routers User Guide
Equivalent web parameter
Immediately
In h hrs m mins s secs.
This CLI value is entered in minutes only.
Cancel reboot
Reboot the router
843