Tacacs+ Configuration Parameters - Digi TransPort WR31 User Manual

Configure security settings
TACACS+ to local privilege level mappings
TACACS+ level
>= 15
12-14
8-11
4-8
0-3

TACACS+ configuration parameters

To configure TACACS+ parameters go to Configuration > Security > TACACS+.
Primary TACACS+ Server
Hostname or IP address of Server a.b.c.d Port n
The IP address or hostname of the primary TACACS+ server is entered into the left-hand text box.
If required a port number may also be specified using the right-hand text box. TACACS+ uses TCP
port 49 by default. Entering a different number into this text box will cause the router to use that
port instead. The primary and secondary TACACS+ servers use this port number.
Server Key
The encryption key to use when communicating with the primary server.
Confirm Server Key
The key to allow the router to confirm that the two strings are identical.
Secondary TACACS+ Server
Hostname or IP address of Server
The IP address or hostname of the secondary (backup) TACACS+ server. The router uses this
value if it cannot open a socket to the primary server.
Digi TransPort WR Routers User Guide
Local level
Super
High
Medium
Low
None
TACACS+ parameters
723