Digi TransPort WR31 User Manual page 623

Configure alarms
Email Notifications Parameter descriptions
To use the email alert facility, you must first specify a valid Dial-out number, Username, and
Password, and set the SMTP parameters correctly. The Dial-out number, Username and Password
parameters are on the Configuration > Network > Interfaces > Advanced > PPP n pages where n
is the relevant interface number. The SMTP parameters are on Configuration > Alarms > SMTP
Account.
Send email notifications
Enables the display of the configurable parameters when checked.
Send an email notification when the event priority is at least n
The lowest priority event that will generate an email alert message. For example, if this value is
set to 6, only events with a priority of 6 or lower (7, 8, or 9) trigger an automated email alert
message. To disable email alarms, set this value to 0.
Send a maximum of n emails per day
The limit on the number of emails that can be sent during any 24-hour period. The intention is to
prevent excessive alerts being sent when the event trigger value is set to a high priority / low
value (for example, 1, 2, or 3), such as a value that results in a large number of automated email
alert messages being generated. A maximum of 255 emails can be sent in a day.
n emails have been sent today
A status message, indicating how many emails have been sent during the last 24-hour period.
Use email template file
The name of a template file to form the basis of any email alert messages generated by the event
logger. The default template is a file called event.eml stored in the compressed .web file. You
can create alternative template, but to be valid, it must have the .eml file extension and be
stored in the normal file directory. A new template with the name event.eml takes precedence
over the predefined event.eml template, but it is recommended to use a new name, such as
event1.eml.
Email To
The standard email address format for the intended recipient of the alert.
Digi TransPort WR Routers User Guide
Event Settings parameters
623