Digi TransPort WR31 User Manual page 357

Configure DNS servers and Dynamic DNS
Host and Domain Name(s)
Up to five host/domain names that are to be updated using the service.
Destination port #
The IP port to use as the destination port. The default value is 0 which causes the router to use
the default port number which is port 80.
DynDNS User Name
The username to use when updating the hostnames. This will have been supplied by the service
provider.
DynDNS Password
The password to use when updating the hostnames. This will have been supplied by the service
provider.
Confirm DynDNS Password
Enter the password into this text box to confirm it.
DynDNS DDNS System
The value selected from this drop-down list the dynamic DNS system containing the hostnames
to be updated. The available options are:
Dynamic DNS
•
Static DNS
•
Custom DNS
•
When default route/interface x,y becomes active, send DDNS update
The radio buttons select whether or not the router should use the default interface or the
interface specified from the drop-down list. If the specified interface option is selected, the
required interface is selected from the drop-down list and the interface instance is entered into
the adjacent text box. If the default interface is selected, the client will keep track of and use the
current default route.
Use Wildcards
Selects whether or not wildcard matching on the hostname will be performed. The options are:
Disable wildcards
•
Enable wildcards
•
No change to service settings
•
When enabled, the Dynamic DNS service will match DNS requests of the form *.hostname where
* matches any text. For example, if Hostname1 was set to site.dyndns.com and wildcard
matching was enabled, then www.site.dyndns.com would resolve to the interface address.
Digi TransPort WR Routers User Guide
Configure Dynamic DNS
357