Digi TransPort WR31 User Manual page 412

Configure Virtual Private Networking (VPN)
Related CLI commands
Entity Instance Parameter
eroute n descr
eroute n peerip
eroute n bakpeerip
eroute n locip
eroute n locmsk
eroute n locipifent
eroute n locipifadd
eroute n remip
eroute n remmsk
eroute n remnetid
eroute n authmeth
eroute n ourid
eroute n ouridtype
eroute n peerid
eroute n privkey
eroute n espenc
eroute n enckeybits
eroute n espauth
eroute n dhgroup
eroute n ikever
eroute n ikecfg
Digi TransPort WR Routers User Guide
Values Equivalent web parameter
String Description
IP address or The IP address or hostname of the remote unit.
hostname
IP address or Use n as a backup unit.
hostname
IP address IP Address (for Local LAN)
IP Mask IP Mask (for Local LAN)
blank, ETH, PPP Use interface x,y
x=Interface type
Integer Use interface x,y
y=interface number
IP address IP Address (for Remote LAN).
IP Mask IP Mask (for Remote LAN).
String Remote Subnet ID.
Off, Preshared, Use the following security on this tunnel.
xauthinitpre, rsa,
xauthinitrsa
String Our ID.
0=IKE ID Our ID type.
1=FQDN
2=User FQDN
3=IPv4 Address
String Remote ID.
Filename RSA Key File.
off, null, des, 3des, Use enc encryption on this tunnel.
aes
128, 192, 256 Use enc encryption on this tunnel.
off, md5, sha1 Use auth authentication on this tunnel.
0, 1, 2, 3 Use Diffie Hellman group.
1, 2 Use IKE n to negotiate this tunnel.
0, 1 Use IKE configuration.
IPsec parameters
412