Digi TransPort WR31 User Manual page 224

Configure network interfaces
Related CLI commands
Entity Instance
adsl 0
adsl 0
adsl 0
apvc 0
Additional CLI commands
The following command is not available from the web interface:
adsl 0 debug {0|1}
Where 0 is off and 1 causes debugging information to be sent to the CLI.
Digi TransPort WR Routers User Guide
Parameter Values
oper_mode Multi,ANSI,G.dmt,G.lite,ADS
L2, ADSL2+
usefwfile on, off
watchdog on, off
oammanage on, off
Configure DSL interfaces
Equivalent web parameter
Operational mode
Load DSL firmware from flash file
Enable watchdog
Manage this PVC using ATM OAM
cells
224