Digi TransPort WR31 User Manual page 320

Configure network interfaces
Entity Instance Parameter
ppp n pingip2
ppp n ip2count
ppp n pingresp
ppp n pingis
ppp n ping2cont
ppp n pingdeact
ppp n pingfreth0
ppp n pingresetint
ppp n
ppp n dlwarnkb
ppp n dlstopkb
ppp n dlrstday
ppp n
ppp n sscnt
ppp n sssecs
ppp n lscnt
ppp n rebootfails
ppp n radius
Digi TransPort WR Routers User Guide
Configure Advanced interfaces settings: External modems and PPP
Values
Valid IP address
a.b.c.d
0-2147483648
0-2147483648
off, on
off, on
0-2147483648
off, on
off, on
off, on
0-2147483647
0-2147483647
0-255
0-2147483648
0-2147483648
0-2147483648
0-2147483648
off, on
Equivalent web parameter
Switch to sending pings to IP host
a.b.c.d after n failures
Switch to sending pings to IP host
a.b.c.d after n failures
Ping responses are expected within s
seconds
Only send Pings when this interface is
"In Service"
New connections to resume with
previous Ping interval
Reset the link if no response is received
within s seconds
Use ETH 0 IP address as the source IP
address
Defer sending pings if IP traffic is being
received
Limit the data transmitted over this
interface
Issue a warning event after n XBytes
Stop Data from being transmitted
after n XBytes
Reset the data limit on the n day of the
month
When the link disconnects, indicate
that the connection failed if no IP
packets were received
Reset this interface if n packets are
transmitted and the connection has
been up for at least s seconds
Reset this interface if n packets are
transmitted and the connection has
been up for at least s seconds
Reboot the router after n consecutive
resets
Reboot the router after n consecutive
connection failures
Use RADIUS for authentication when
acting as a server
320