Digi TransPort WR31 User Manual page 677

Configure Remote Management
SNMP Filter parameters
SNMP filters allow the system administrator to control access to the router MIBs via SNMP. This
functionality is controlled by a table on the web configuration page. This table has three columns,
two main headed columns as described below and a control column containing button widgets.
The table has a capacity of ten entries, SNMP filter instances range from 0 to 9.
Username
The username (as configured in the Configuration > Security > Users section) of the user to
whom the access restriction is applied.
OID Prefix
The Object ID (OID) prefix for the range of objects in the MIB that the user is not allowed to view.
such as 1.3.6.1.2.1.4.
Add
Adds the username and OID prefix into the table.
Delete
Deletes the associated entry in the table.
Related CLI commands
Entity Instance
snmpfilter n
snmpfilter n
Digi TransPort WR Routers User Guide
Parameter Values
user username
oid Valid SNMP OID
SNMP parameters
Equivalent web parameter
Username
OID Prefix
674