Digi TransPort WR31 User Manual page 486

Configure Secure Shell (SSH) server and client
Related CLI commands
Entity Instance
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
sshcli 0-7
Digi TransPort WR Routers User Guide
Parameter Values
conn_to 0-10 seconds
hostsfile Up to 12 characters (8.3
format)
idfile Up to 12 characters (8.3
format)
idrsafile Up to 12 characters (8.3
format)
idrsafile1 Up to 12 characters (8.3
format)
comp 0=disabled
pubkeyauth 0=disabled
pwdauth 0=disabled
enc3descbc 0-2147483647
0=Disabled
encaes128cbc 0-2147483647
encaes192cbc 0-2147483647
encaes256cbc 0-2147483647
macmd5 0-2147483647
macmd596 0-2147483647
macsha1 0-2147483647
macsha196 0-2147483647
svrlaliveint 0-2147483647
svralivemax number
debug 0, 1
0=Off
1=On
Configure Secure Shell (SSH) Client
Equivalent web parameter
Time in seconds to wait for the server to
begin the banner exchange part of the
protocol after the socket connects.
Key file to use as the regular SSH client.
Key file to use as the regular SSH client.
Name of either an SSH V1 or SSH V2 host key.
Name of either an SSH V1 or SSH V2 host key.
Use Deflate compression, level.
Enables SSH public-key authentication to
connect to OpenSSH.
Enables SSH password authentication to
connect to OpenSSH.
3DES.
AES (128 bits).
AES (192 bits).
AES (256 bits).
MAC MD5.
MAC MD5-96.
MAC SHA1.
MAC SHA1-96.
Interval in seconds to send the server a
keepalive packet.
Maximum number of keepalives to send
without response before the connection is
killed
Enable Debug
486