Digi TransPort WR31 User Manual page 729

Configure security settings
Server Key
The encryption key to use when communicating with the secondary server.
Confirm Server Key
Enter the key into this text box to allow the router to confirm that the two entries are identical.
Enable local authentication if there is no response from the server(s)
Allows local authentication if TACACS+ authentication fails.
Enable TACACS+ Authentication
Enables authentication. When authentication is enabled, user authentication takes place on the
TACACS+ server. When disabled, user authentication takes place locally on the router.
Enable TACACS+ Authorisation
Enables authorization which means that authorization of the application takes place and
authorization of application-related commands also takes place.
Enable TACACS+ Accounting
Enables accounting. Sends accounting messages at the start and end of application sessions,
where applicable, and update messages from command sessions when commands are denied
locally or after they are executed.
Related CLI Commands
Entity Instance Parameter
tacplus 0 svr
tacplus 0 port
tacplus 0 key
tacplus 0 svr2
tacplus 0 key2
tacplus 0 localauth
tacplus 0 authent
tacplus 0 author
tacplus 0 acct
tacplus 0 debug
tacplus 0 tacacspageauth off, on
Digi TransPort WR Routers User Guide
Values
Up to 64 characters for hostname
or valid IP address a.b.c.d
0-2147483647
Default 49
Up to 20 characters
Up to 64 characters or valid IP
address a.b.c.d
Up to 20 characters
off, on
off, on
off, on
off, on
off, on
TACACS+ parameters
Equivalent web parameter
Hostname or IP address of server
Port
Server Key
Hostname or IP address of server
Server Key
Enable local authentication if there
is no response from the server(s)
Enable TACACS+ Authentication
Enable TACACS+ Authorization
Enable TACACS+ Accounting
n/a
n/a
724