Digi TransPort WR31 User Manual page 285

Configure network interfaces
Escape delay s milliseconds
The delay required between entering the escape sequence (default +++) and the AT command
for the router to drop back into command mode. This is equivalent to the S12 register setting.
Related CLI commands
Entity Instance Parameter
transip n port
transip n host
transip n remport
transip n keepact
transip n staycon
transip n cmd_echo_off
transip n escchar
transip n esctime
Digi TransPort WR Routers User Guide
Values
Valid port number 0-65535
Valid IP address a.b.c.d or
hostname
Valid port number 0-65535
0-255
on, off
on, off
Valid ASCII character
0-255
Configure serial interfaces
Equivalent web parameter
Listen on port
Connect to IPaddress a.b.c.d or
Hostname
Port
Send TCP Keep-Alives every s
seconds
Enable Stay Connected mode
Disable command echo
Escape char c
Escape delay s milliseconds
285