Digi TransPort WR31 User Manual page 686

Configure security settings
User security settings
User system security setting
To configure system security settings, go to Configuration > Security> User.
The User parameter pages allow you to configure a number of authorized users. The number of
users available depends on the firmware build the router is running. Each user has a password and
access level that determines the facilities to which the user has access.
Username
The name of the user. Up to 14 characters are allowed. You can use some special usernames:
Username
%s
%i
%c
If a % symbol is part of the username, you must enter another % character as an escape
character. For example user%1 should be entered as user%%1.
Password / Confirm Password
The password for the user. Up to 14 characters are allowed.
Access Level
Selects the access level for the user. There are the following options:
Access level
Super
High
Medium
Low
Read Only
None
Digi TransPort WR Routers User Guide
Description
Uses the serial number of the router as the username.
Uses the IMEI of the cellular module as the username.
Uses the ICCID of the SIM as the username.
Access allowed
Allows full access to all facilities.
Allows user to reconfigure the general configuration of the router and to change
some settings such as the time and date.
Not allowed to change user settings.
Allows user to access medium level configuration commands which allow some
configuration of the router.
Allows user to access low level commands which tend to be status and statistics
commands.
Read only access of the configuration.
User is not allowed to login via Web, FTP, SSH, and Telnet.
User security settings
681