Digi TransPort WR31 User Manual page 319

Configure network interfaces
Entity Instance Parameter
ppp n There is no explicit
parameter to enable or
disable this setting; it is
disabled by disabling the
ppp n echo n and
ppp n echodropcnt n
parameters
ppp n echo
ppp n echodropcnt
ppp None
ppp n hrtbeatip
ppp n hrtbeatint
ppp n hbipent
ppp n hbipadd
ppp n hbiproute
ppp n hbimsi
ppp n hbgps
ppp n None
ppp n pingsiz
ppp n pingip
ppp n pingint
ppp n pingint2
Digi TransPort WR Routers User Guide
Configure Advanced interfaces settings: External modems and PPP
Values
off, on
0-2147483648
0-2147483648
Valid IP address
a.b.c.d
0-2147483648
Blank, PPP, ETH
Blank is default
Valid interface
number
0-2147483648
off, on
off, on
off, on
off, on
0-2147483648
Valid IP address
a.b.c.d
0-2147483648
0-2147483648
Equivalent web parameter
Send LCP echo request packet to the
remote peer
Send LCP echo requests every s
seconds
Disconnect the link after n failed echo
requests
Generate Heartbeats on this interface
Send Heartbeat messages to IP
address a.b.c.d every h hrs, m mins, s
secs
Send Heartbeat messages to IP
address a.b.c.d every h hrs, m mins, s
secs
Use interface x,y for the source IP
address
Use interface x,y for the source IP
address
Select transmit interface using the
routing table
Include IMSI information in the
Heartbeat message
Include GPS information in the
Heartbeat message
Generate Ping packets on this
interface
Send n byte pings to IP host a.b.c.d
every h hrs, m mins, s secs
Send n byte ping to IP host a.b.c.d
every h hrs, m mins, s secs
Send n byte ping to IP host a.b.c.d
every h hrs, m mins, s secs
Send pings every h hrs, m mins, s
seconds if ping responses are not
being received
319