Digi TransPort WR31 User Manual page 535

Configure legacy protocols
Entity Instance Parameter
snaip x t1time
snaip x t200
snaip x window
snaip x tinact
snaip x vmac
snaip x peervmac
snaip x IPaddr
snaip x r_IPport
snaip x w_IPport
snaip X srcipent
snaip x srcipadd
snaip x sock_inact
snaip x ver
snaip x passive
snaip x dlswwindow
snaip x udp_cap
snaip x use1sock
snaip x inc_mac_exc
snaip x mac_exc_val
snaip x iunsolresp
snaip x waitforcontact
snaip x con_attempts
snaip x con_boff_time
Digi TransPort WR Routers User Guide
Configure Systems Network Architecture over IP (SNAIP)
Values
1-60000
1-60000
1-7
0-3000
Text (valid MAC address)
Text (valid MAC address)
Text (valid IP address)
0-65535
0-65535
auto, eth, ppp
0-255
0-2147483647
0-2
0= active
1=passive
1-100
1=enabled
0=disabled
On, Off, Compatible
1=enabled
0=disabled
0-1
1=enabled
0=disabled
1=enabled
0=disabled
0-2147483647
0-2147483647
Equivalent web parameter
T1 timer.
T200 timer.
Window Size.
Disconnect link if there has been no
activity for x seconds.
Virtual MAC Address.
Virtual MAC Address of Peer.
IP address of the Peer DLSw unit.
Listen on Port.
Use Port x if this unit starts the DLSw
protocol.
Use interface for source IP address.
Use interface for source IP address.
Close TCP connection if it is idle for x
secs.
DLSw Ver.
DLSw Role.
DLSw Window.
UDP Capable.
Use 1 socket.
Include MAC Exclusivity Capability.
Mac Exclusivity Value.
Ignore unsolicited response frames.
Wait for Contact before progressing to
CONNECT PENDING state.
Make immediate connection attempts
before backing off
Backoff for x seconds before attempting
to connect again
535